IB Math AI HL May 2025 Paper 2 TZ3

Exam-style practice modelled on the IB Math AI HL May 2025 Paper 2 TZ3 paper: new contexts and numbers, the same skills, order and marks. Written by Strive.

May 2025
Paper 2
Time zone 3
7 questions
110 marks
Calculator

Practise this paper

Log in to answer questions on these skills, get marked instantly and track your progress.

Questions

  1. 1.

    A workshop makes a sealed display plinth in the shape of a right prism with a square base. The base has side length cm, the prism has height cm, and its internal volume is cm. Its height consists of a fixed length of cm together with cm for each centimetre of base side length. Figure 1 is not drawn to scale.

    The workshop is also designing a sealed cylindrical culture chamber, shown in Figure 2. It has radius cm, height cm and fixed internal volume cm, where . Let cm be its total exterior surface area. The material used for both designs has negligible thickness.

    1. (a)

      Write down in terms of .

      [1 mark]

    2. (b)

      Find the values of and .

      [3 marks]

    3. (c)

      Calculate the total exterior surface area of the display plinth.

      [3 marks]

    4. (d)

      For the culture chamber in Figure 2, find in terms of .

      [2 marks]

    5. (e)

      Show that the total exterior surface area of the culture chamber is given by

      .

      [2 marks]

    6. (f)

      Find .

      [3 marks]

    7. (g)
      1. (i)

        Using a graphical method, find the value of that minimizes . Give your answer to three significant figures.

        [2 marks]

      2. (ii)

        Find the minimum total exterior surface area of the culture chamber. Give your answer to three significant figures.

        [1 mark]

    8. (h)
      1. (i)

        Find .

        [1 mark]

      2. (ii)

        Determine the concavity of the curve on the domain . Justify your answer.

        [2 marks]

  2. 2.

    A harbour authority models the water level at a tidal gauge. At time hours after 07:20, the predicted water level , in metres, is given by

    where and angles are measured in degrees. Figure 1 shows one complete cycle of the model.

    1. (a)

      Show that .

      [1 mark]

    2. (b)

      Find the predicted water level at 09:20.

      [2 marks]

    3. (c)
      1. (i)

        Write down the amplitude of the model.

        [1 mark]

      2. (ii)

        Write down the equation of the principal axis of the model.

        [2 marks]

    4. (d)

      The actual water level may differ from the predicted water level by up to m. A service boat can pass beneath a low beam only when the harbour authority can be certain that the actual water level is not greater than m.

      Determine the earliest clock time during the cycle shown at which the boat is guaranteed to be able to pass beneath the beam. Give your answer to the nearest minute.

      [4 marks]

    5. (e)

      The boat leaves at the unrounded earliest time found in part (d) and travels to a floating monitoring platform. To avoid grounding, the harbour authority must also be certain that the actual water level is at least m.

      For planning purposes, the gauge model represents the water level along the entire route and at the platform. Both water-level conditions must hold throughout the complete trip. The total travelling time from the harbour to the platform and back is hours.

      Determine the maximum duration, in hours, for which the boat can remain at the platform during this first operating interval.

      [5 marks]

  3. 3.

    A pedestrian bridge crosses a canal. Figure 1 shows a vertical cross-section of the canal and the underside of the bridge. The horizontal distance is measured in metres from the left bank. The height, metres, of the underside of the bridge above the water surface is modelled by

    $$

    Water depths are measured at equally spaced positions across the canal. The measurements are shown in Table 1.

    A floating work platform is to travel along the canal. Its rectangular cross-section is shown in Figure 2. The diagram is not drawn to scale.

    1. (a)

      Using the trapezoidal rule and the measurements in Table 1, find an estimate for the cross-sectional area of water in the canal.

      [3 marks]

    2. (b)

      The water flows through this cross-section at a speed of m s. Find the volume of water passing through the cross-section each second.

      [2 marks]

    3. (c)

      The platform travels with its centre line at . Find the vertical clearance between the bottom of the platform and the channel bed.

      [1 mark]

    4. (d)

      Find the maximum vertical clearance between the water surface and the underside of the bridge.

      [2 marks]

    5. (e)

      The platform travels with its centre line directly below the highest point of the bridge. Determine whether the platform can pass under the bridge without touching it.

      [4 marks]

  4. 4.

    A ceramics cooperative has five workshops, , , , and . Components move between the workshops along directed conveyor links. The adjacency matrix of the network is

    $$

    The rows and columns are in the order , , , , . An entry of in row and column represents a directed link from workshop to workshop .

    For an inspection task, travel between any pair of workshops is possible in both directions. Figure 1 shows the least travel costs, in cost units. All entries other than are known.

    1. (a)

      State the pair of workshops connected by a conveyor link in only one direction.

      [1 mark]

    2. (b)
      1. (i)

        A walk of length three uses exactly three directed conveyor links. Using an appropriate matrix, show that not every ordered pair of workshops is joined by a walk of length three.

        [2 marks]

      2. (ii)

        State, with a matrix justification, whether every workshop can be reached from every workshop using at most three directed conveyor links.

        [3 marks]

    3. (c)

      The entry is obtained by travelling from to through exactly one of the other workshops. Identify all possible routes of this type and calculate their costs. Hence show that .

      [3 marks]

    4. (d)

      Using the nearest-neighbour algorithm, beginning at , find the resulting tour, including the return to , and its total cost.

      [3 marks]

    5. (e)

      Delete workshop and apply the deleted-vertex algorithm. Find the resulting lower bound for the cost of a tour through all five workshops.

      [4 marks]

  5. 5.

    At a coastal reserve, two airborne sensor pods, Aster and Boreal, are modelled as particles. Positions are measured in kilometres relative to an origin , where the positive -, - and -directions are east, north and vertically upward respectively. Time is measured in hours.

    The position vector of Aster is $$

    At , Boreal is at the same position as Aster. Boreal then travels in a straight line at a constant speed of km h in the direction $$

    1. (a)

      Write down the coordinates of Aster when .

      [1 mark]

    2. (b)
      1. (i)

        Find the displacement vector of Aster from to .

        [2 marks]

      2. (ii)

        Find the distance travelled by Aster from to .

        [2 marks]

    3. (c)

      Find the smaller angle between the straight-line paths of Aster and Boreal.

      [5 marks]

    4. (d)

      Find the distance between Aster and Boreal when .

      [5 marks]

  6. 6.

    A bicycle workshop uses an automated machine to true wheels one at a time. When a wheel is submitted, is the number of other wheels scheduled for treatment before it. The values used by the workshop are listed in Figure 1.

    Figure 1

    The duration, minutes, of one truing cycle is modelled by . Cycle durations are mutually independent and are independent of .

    1. (a)
      1. (i)

        Find .

        [1 mark]

      2. (ii)

        Find .

        [2 marks]

    2. (b)

      The workshop estimates the mean waiting time using the product . Find this product.

      [2 marks]

    3. (c)

      Find the probability that one truing cycle lasts more than minutes.

      [2 marks]

    4. (d)

      Two wheels are selected independently. Find the probability that their total truing time exceeds minutes.

      [4 marks]

    5. (e)
      1. (i)

        Let be the waiting time until the submitted wheel begins treatment. In the workshop's model, every wheel counted by requires one complete truing cycle. Hence, when , is the sum of complete cycle durations, and when , .

        For this calculation, take . The workshop will purchase another machine if the probability that is greater than .

        Find .

        [3 marks]

      2. (ii)

        State whether the workshop should purchase another machine.

        [1 mark]

  7. 7.

    Noor constructs a branching sculpture called Copper Canopy. Stage 1 consists of one strut. At each later stage, three new struts are attached to the free end of every strut added during the preceding stage. Each new strut has length of its parent strut and is directed at an angle of , or relative to the parent strut, as shown in Figure 1.

    The struts are represented by displacements on an Argand diagram, where one unit represents one metre. The complex number represents the displacement along the first strut.

    1. (a)

      A guide displacement has modulus and argument . The displacement is obtained by rotating clockwise through about the origin, as shown in Figure 2.

      Find in the form , where .

      [3 marks]

    2. (b)
      1. (i)

        The first strut has length m. Figure 3 shows the sculpture at the end of stage 2.

        Show that, after stage 2, the sculpture contains m of strut.

        [2 marks]

      2. (ii)

        Figure 4 summarizes the numbers and individual lengths of the struts added at selected stages.

        Find the combined length of the struts present at the end of stage 7. Give your answer to three significant figures.

        [5 marks]

      3. (iii)

        State whether the combined length approaches a finite value as the number of stages increases. Justify your answer.

        [2 marks]

    3. (c)
      1. (i)

        An inspection device follows one route through three struts. Its first displacement is . At each of the next two junctions, its new displacement has modulus of the preceding modulus and is rotated through anticlockwise, as shown in Figure 5.

        Find the resultant displacement after the three struts, expressed as a sum of complex numbers in exponential form.

        [4 marks]

      2. (ii)

        Write down the resultant displacement in Cartesian form.

        [1 mark]

Answers and mark schemes are available to logged-in students and teachers. Create a free account.

More IB Math AI HL papers

These are Strive's own practice questions, written to match the skills, structure and marks of each past paper. They are not the original exam papers. IB and International Baccalaureate are trademarks of the International Baccalaureate Organization, which does not endorse Strive.